Contents

TLS Inspector

Inspect a live TLS endpoint (with STARTTLS for SMTP, IMAP, POP3 and FTP), or decode certificates and CSRs offline.

Sidebar group: Analysis · Works offline: partly (the Decode PEM / DER tab is offline; Inspect and "Test versions and ciphers" connect to the target, only when you click them) · Needs admin rights: no

When to use it

Quick start

  1. Open TLS Inspector from the Analysis group. The Live endpoint tab is selected.
  2. Enter a Host: a hostname, an IP address, or a URL such as https://www.example.com/login.
  3. Check Port (443 by default). For a mail or FTP server, pick the protocol under STARTTLS; the port changes to match.
  4. Click Inspect (or press Enter).
  5. Read Connection for what was negotiated and Evaluation for trust and hostname results.
  6. Expand certificates under Presented chain for details.
  7. Optional: click Test versions and ciphers to see which TLS 1.2 and 1.3 suites the server accepts.
  8. Use Export to save a report or add it to a project.

To decode offline, switch to Decode PEM / DER, paste one or more PEM blocks and click Decode, or click Open file....

Inputs and options

Live endpoint tab

Field What it means Default / accepted values
Host Target to connect to. A scheme, path, query and user@ are stripped from URLs. Hostname, IPv4, IPv6, host:port, [2001:db8::1]:443 or a URL.
Port TCP port. 443. Changes automatically with STARTTLS until you edit it: SMTP 587, IMAP 143, POP3 110, FTP 21. 1 to 65535. A port typed in Host (host:8443, or a URL with a port) takes priority; the Port field then shows that port and is locked.
STARTTLS Plain-text upgrade before the handshake. None (direct TLS), SMTP, IMAP, POP3, FTP.
Connect to IP (optional), under Advanced Connect to this address instead of resolving the host. The hostname is still used for SNI and checks. Empty (resolve the host). Must be an IP address.
Send SNI, under Advanced Include the hostname in the TLS ClientHello. On.
Inspect Connect, run STARTTLS if chosen, handshake, and evaluate.
Test versions and ciphers One separate handshake per TLS 1.2 and 1.3 suite this build supports, run in parallel. Shown after a successful Inspect.

Decode PEM / DER tab

Field What it means Default / accepted values
Certificates or CSR (PEM) Pasted PEM text. Several blocks (a chain or bundle) are fine. Up to 1 MB and 50 items.
Decode Decode the pasted text.
Open file... Read a file from disk. PEM or a single DER blob. .pem, .crt, .cer, .der, .csr, .req, .p7b, .txt. Up to 1 MB.

Reading the results

Connection (as measured). Connected to (the address and port used), SNI sent, Protocol (for example TLS 1.3), Cipher suite, Key exchange group, ALPN (the client offers h2 and http/1.1), and Timing for connect, STARTTLS and handshake in milliseconds. With STARTTLS, STARTTLS exchange shows the plain-text conversation, lines prefixed S: (server) and C: (client).

Evaluation (Net3PO's checks, not the server's claims). Green for pass, red for fail, amber for chain notes:

A hint names the store used: the Mozilla root store bundled with Net3PO and its root count.

Versions and ciphers. A header shows how many suites were accepted out of those tested. Each row lists the version, suite name and result: accepted, rejected (with the alert, or "connection closed (common way to refuse)"), or error.

Presented chain. One card per certificate, in the order the server sent it (up to 10). The leaf is open by default. Each card has a validity pill ("N days left", "expired N days ago" or "not valid yet"), plus CA and self-signed pills when they apply. The summary line shows the subject, issuer, validity dates, key and signature algorithm. Notes flag expiry within 30 days, RSA keys under 2048 bits, SHA-1 or MD5 signatures, missing SANs, and validity over 398 days. Details lists subject, issuer, SANs, validity, key, signature, type (CA with path length, or end entity), key usage, extended key usage, serial, OCSP, CRL and CA issuer URLs, the certificate SHA-256 and the SPKI SHA-256.

Decode results. The same cards, titled "Certificate N" or "CSR N". A CSR card shows "signature OK" or "bad signature" (whether it verifies with its own key), plus subject, SANs, key and signature. Warnings list skipped blocks, PEM errors or "no certificate or CSR found".

Example: inspecting mail.example.com on port 587 with SMTP shows Connected to 192.0.2.25:587, SNI sent mail.example.com, Protocol TLS 1.3, a STARTTLS exchange beginning S: 220 mail.example.com ESMTP, C: EHLO net3po.invalid, and in Evaluation "mail.example.com is covered by *.example.com".

What the results do and do not tell you

Online activity and privacy

Inspect resolves the host (unless you set Connect to IP), opens one TCP connection and performs one handshake. Test versions and ciphers opens one connection per suite tested, in parallel. Both run only when clicked. For SMTP the client introduces itself as EHLO net3po.invalid.

Decoding is offline. If a pasted block is a private key, it is not parsed, stored or included in any report, and it is removed from the text box after decoding. Nothing is saved unless you export or add to a project.

Export and projects

Both tabs have an Export menu: HTML, PDF, Markdown, Plain text, Redacted... and Add to project. See Export and redaction and Projects and notes.

The live report holds the measured connection (with the STARTTLS transcript), the evaluation findings with the trust-store note, one section per presented certificate, and the version and cipher table if you ran it. The decode report holds one section per certificate or CSR and a notes section. Private keys are never part of a report.

Platform notes

No differences between macOS, Windows and Linux. Trust uses the bundled root store on every platform, not the operating system's store.

Troubleshooting

"enter a hostname or IP address". The Host field is empty.

"not a valid hostname" or "invalid port". Check the Host entry for stray characters.

"

: connection refused" or "no answer within 8 s". Nothing is listening, or a firewall drops the traffic. Check the port.

"TLS handshake failed: the server did not answer with TLS (wrong port, or STARTTLS needed?)". The port speaks plain text first. Choose the right STARTTLS mode.

"the server refused the handshake (no shared version, cipher or curve)". The server only offers something this build cannot negotiate, such as TLS 1.0/1.1 or CBC suites.

"the server does not recognise the SNI name". Check the hostname, or try with Send SNI off.

"STARTTLS: the server does not offer STARTTLS" or "STARTTLS refused". The service does not support or allow the upgrade.

"file larger than 1 MB; certificates and CSRs are much smaller". You opened the wrong file.